Monday, August 9, 2021

Important Bicycling Facts & Information

 Created On: 8/09/2021

Published On: 8/09/2021

As you might have guessed, there are a lot of myths in the bicycling world, and so it's very critical to learn the facts, which is imperative to figure out EARLY!  Like how to shift a bicycle, which is something I'm going to cover here for the unsophisticated bicyclist.  Also, I'll cover a host of other facts and myths as well, so pay close attention and consider well what is covered!

Bicycles get stolen A LOT, so much in fact that, if you don't lock your bicycle, there's 20-40% chance it will get stolen within 10 minutes or less, depending upon if there are cameras around and what side of town you are on, and I say that because in wealthier neighborhoods kids often leave their bicycles unattended or in the yard, but they also get stolen quite frequently too.  It also happens a lot near poorer  neighborhoods too, where wandering thieves pick up anything within reach of the sidewalk, in yards, etc., and this is why getting a lock for your bicycle is paramount!

Some bicycle locks are very easy to take off, small cable lines only take less than a minute or two, so if you want a solid lock, get a U-Lock, or at the very least a very thick cable style lock, those off far more security than a standard or smaller cable lock, and chains can be popped off in SECONDS!  Of course nobody is going to carry around a thick chain (Think 1/2" think here), far too heavy, but they will carry around a thick U-Lock, but the U-Lock only protects one wheel, and it can't protect the seat!

Another important thing to learn about bicycles is shifting, too many riders don't really truly know how to properly shift a bicycle, specifically the 3 ring crankset / 7-9 Gear rear cassette setup, and learning this is imperative to multiple things, like lengthening the lifespan of your chain and increasing the speed of the bicycle.  If you use 1-3rd gear with the first Crank Ring (Low Gear / Smaller Crank), that's perfect for uphill battles, and if you use 3-5th gear for the 2nd Crank Ring (Middle), that's perfect for flat level riding, and the 3rd Crank (The big one) is best used for 6-9th gear, though you can use it as low as 3rd gear for flat riding, depending upon how strong you are!

When you shift correctly, you can maintain your "Tempo" / "Rhythm" of pedaling, and how you sit can greatly increase or decrease strain to your muscles in your legs, but ultimately pedaling a smooth tempo in the proper gear will make riding a bicycle seem so very easy and effortless, which it should be!  However, new cyclist tend to use only one gear, and you see the "Newb" struggling up slight inclines / hills, it's funny, and I dare say I too was once like them!

Some of the more important facts are things you learn, like tire size is critical to know before selecting an inner tube replacement, and I say this because not all facts are common sense, like finding the frame size of a bicycle by measuring from the center of the crank to the top of where the seat post goes into the frame.  You'd be surprised how many people have never measured a bicycle's actual size, but bicycle facts are a long list of things people will come to learn naturally and things they will come to learn by reading or learning from other cyclist.

One fact I learned from a BMX rider is, he got tired of getting flats so bad that he uses TWO bicycle tires to prevent flats, and he still does massive tricks on his bike and rides it every day, it works!  Facts can be unconventional wisdom learned, like the larger &/or thinner your tire is, the easier it gets flat, and though puncture protection does work (Pretty well), it does make the bicycle heavier usually (The cheaper puncture resistant tires that is), and may slow you down some.

I'd rather ride slower than get flats more often, how about you?  It makes zero sense to head out on the trail to get 2 flats in one ride (SUXY!), so do learn about "Better tires", and that's to say chuck those crummy original manufacturing equipped tires for better tires, but do note that you should first still use the original manufacturing tires first, unless they go flat too often!  It can get expensive if you have to frequently repair flat tires, so watch where you a riding, and learn how to fix inner tubes with super glue and magazine paper!

I'm sure I'll probably update this and add some more content as I think on the subject more, but that's it for now, feel free to comment if you'd like to add your own tidbits to add to the article!


Thanks for reading, I hope this blog helps you, and please share a link with others, thanks!.

If you would like to help me continue to help others, you can use Pay Pal or CashApp to send me a donation via my email at:  galegtech@gmail.com

Thank You readers for your support!

Copyright © Gale Innes 2023
All Rights Reserved Worldwide

Avoiding Bicycle Hype

 Created On: 8/09/2021

What is bicycle hype?  Well, it's where people try to sell you on all of the latest greatest tech, improvements, or old style ideas that never quite made it to mainstream, like "Tubeless Tires", and when I say "Hype", I'm referring to anything that is gimmicky, has no real added value, or is just the "Latest Fad" (Craze).

Yes, I'm going to talk about Carbon Belt Drive systems here, as you might have guessed, it's a great "Idea", but if you look at the disadvantages, it makes little financial sense!

  1. No side flexibility in belt drives
  2. A belt drive cannot be split up
  3. Belt drive relies on internal gearing systems
  4. A Belt drive system is Far More Expensive!
Because a belt drive can't be split up, a section of the frame has to be opened up in order to change the belt, which means the frame will be more expensive, and all it takes is someone cutting your belt drive and you will have to replace it (Not cheap in many instances), moreover, the internal gearing systems are much more expensive than a traditional rear bike rim and hub w/ a cassette.

Sure, there are some huge advantages, being the bicycle will be a little lighter in weight, maybe a few pounds / or  / a Kilogram or two, but unless you are building a racing bike, none of that matters!  A carbon belt drive fixie (No gears) would be only a little lighter than a chain drive system, so no real added value AT ALL other than slight weight loss.

Many parts or inventions are all hype, but fail to deliver real value for your money, the perfect example of this is "Titanium" bicycles or "Carbon Fiber" parts / bicycles, the cost far outweighs the value!  All financial sense aside, for those who have money to burn, sure, go ahead and spend $5,000+ on a bicycle, but that's NOT going to make you a better rider or make you faster AT ALL.

What makes a bike faster is the tires and air pressure of those tires, the small the tire, the faster the bike goes, REGARDLESS OF TOTAL WEIGHT, gearing and bearing can cause drag, but these are NOMINAL at best, and any decent bearing set on the market is manufactured to be low resistance by basic manufacturing standards.  Otherwise nobody would buy your bike if it automatically slowed down due to large drag on your bearings....

There are of course a lot of people out there who look at full suspension mountain bikes and instantly want one of those, but to be honest, unless you are a professional mountain bike rider, or at the very least an inspiring one in training, FORGET IT!  It's just too costly, is purely for sport, and is not really made for "Daily Riding", though it could be converted to be (Costly).

Indeed, everything that is "New" or "Improved" almost always invariably comes with higher cost, largely because of "Licensing" (They say), but the truth is, investors just want to recoup their money faster, so they charge a lot for the new stuff, and that's why you should avoid "New" tech.  Any intelligent bicyclist can find high quality used bicycles if they know where to look, those bicycles may have obsolete tech, but it is still a functioning & MUCH CHEAPER bicycle.

Cheap however can be bad, in the case that you buy a busted used bicycle, so do inspect the bicycle very well before you purchase it, which most definitely includes, braking, shifting, parts for damage, and RIMS & TIRES!  The cost to replace parts on a bicycle has gotten OBSCENELY EXPENSIVE as of late, due to supply side shock, most bicycles and parts have doubled in prices or more!

Shopping online is the worst idea you can have, rather visit a local bicycle shop or Walmart FIRST, if it's a specialty part, then I'd recommend shopping Walmart online, they are much cheaper than Amazon by miles in MOST INSTANCES!  However, QUALITY IS CRITICAL, and that's because nobody wants cheap junk that is of poor quality!

Tubeless tires are NOT great, they were designed for mountain biking, and the tubeless tires that literally need no air at all are NOT recommended AT ALL, indeed they are largely a gimmick!  Electric bicycles are indeed nothing more than a bicycle with a battery / electric drive system, is that battery and electric motor worth Thousands of Dollars?  (HELL NO!)

Sure, they are convenient, easy to ride, but when that battery dies, OH BOY!  You won't be liking those heavy bicycles AT ALL!  (Sorry for all the caps, the intentions of this entire blog is to make you THINK!)  Anyway, if you read my other blog post, you'll soon get the idea that many bicycle styles are purely niche, they aren't for the average day rider, and they aren't really for the urban jungle!

Already it has been argued that Carbon parts offer little advantage over aluminum, but the premium cost associated with it completely destroys the value of bicycling, and when you go to replace (Can't fix carbon) the parts, your wallet will hate you late for it!  If you just stick with "What works", instead of going for "The Best", you'll probably have enough money left over for 1 to 3 other bicycles, and so I'd advice my fellow cyclist to "Be Smart" with your money and don't buy the hype!  
(E.g. Carbon anything!)


Thanks for reading, I hope this blog helps you, and please share a link with others, thanks!.

If you would like to help me continue to help others, you can use Pay Pal or CashApp to send me a donation via my email at:  galegtech@gmail.com

Thank You readers for your support!

Copyright © Gale Innes 2023
All Rights Reserved Worldwide

Bicycle Physics Simplified

 Created On: 3/22/2024 It's not rocket science, really... Ever since I started riding a bicycle I slowly learned the principles of physi...